Good to see you!
Login by email.
Welcome to Dulux
Otherwise login by email.
Connect with email
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Forgotten your password?
For more tailored inspiration, please fill in the 3 questions below.
If you have concerns about your privacy?
Read our Privacy Policy.
Delete Account
Dulux Pentalite Emulsion
-
Finish Matt
-
Coverage 14-16 m2/L
-
Drying Time 2-3 Hours
-
Coats 3
-
High Coverage
-
Durable
Product Description
Application Description
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesNew or Bare Surfaces:
New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae and moss with bleach. After priming new surfaces with Dulux Prime On fill the surface with Dulux wall putty. Please refer to PDS of Dulux Prime On and Dulux wall putty for correct application procedure and drying time properties. For best results a single coat of Dulux Prime on over wall putty and dry overnight.
Previously Painted Surface:
Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as describe above if required.
Powdery, dusty and cracked surface:
Make good minor defects. For larger holes and cracks use sand and cement mixture. Allow the surface to dry. Prime the surface and then fill any surface imperfections with Dulux wall putty. For best results a single coat of Dulux Prime on over wall putty and dry overnight. -
2. CleaningClean all equipment with clean water immediately after use.
-
3. StoringStore paint in dry conditions and protect from extreme temperatures.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Dulux Pentalite Emulsion
Save job