Dulux Ambiance Velvet Touch Rich Matt

Fashion Trends for Walls
Gravel Pit
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage 16-18 m2 per liter per coat
  • Drying Time 3-4 Hours
  • Coats 4
Product Features
  • Luxurious Finish

Product Description

Dulux Velvet Touch is a 100% acrylic-based premium quality paint. It is an ultra
luxurious water based interior emulsion with the smooth touch of velvet.
Recommended for interior surfaces only

Application Description

After surface preparation, apply 3-4 coats of Dulux Velvet Touch. Ensure 3-4 hours for drying between successive coats. Use of any other paint apart from the specially formulated Dulux Velvet Touch may deviate the desire finish of Dulux Velvet Touch and make it hard to recondition. STIR THOROUGHLY BEFORE USE. Contains no added lead or mercury.

Health & Safety

Keep out of the reach of children. Do not breathe solvent vapour/spray. Use only in well ventilated areas. Safety data sheet available for professional user on request. Contains HETEROCYCLIC AMINE PESTICIDE. May produce an allergic reaction. Avoid contact with skin or eyes. If swallowed seek medical advice immediately and show this container or label. Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not empty into drains. Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Dispose of used container in compliance with local regulation.

Tips & Advice

  • 1. Preparing the Surfaces
    New or Bare Surfaces: New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Treat any areas affected by mould, lichens, algae & moss with bleach. After priming new surfaces with Dulux Aqua Prime, fill the surface with Dulux Wall Putty. Apply primer on a wall putty before application of topcoat. Previously Painted Sound Surfaces: Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Spot prime and fill the surface as described above if required. Powdery, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prepare surface as described above.
  • 2. Cleaning
    Clean all equipment with clean water immediately after use
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures. Container must be in a secure, upright position and be tightly closed.
Fetching the data, please wait...