Dulux Ambiance Velvet Touch Metallic Silver

    Inspired by lustrous effects, bring cool metallic tones to your rooms
    10YR 67/111
    Change Colour
    Size
    Paint Calculator
    This product is not for online sale and can only be purchased from selected stores.
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Featured Finishes
    • Coverage 8-9 m2 per liter per coat
    • Drying Time 4-5 Hours
    • Coats 2
    Product Features
    • Pure Metallic Finish

    Product Description

    Dulux Velvet Touch Metallic Silver is an acrylic based interior premium quality paint. It is a part of our special effects range, designed to deliver wide variety of wall impacts with a unique metallic finish. Velvet Touch Metallic Silver can be tinted in selected Dulux colours. It is recommended for interior use only.

    Application Description

    After surface preparation apply 2-3 coats of Dulux Velvet Touch base coat in the recommended colour. Ensure 3-4 hours for drying between successive coats. Then apply two coats of Velvet Touch Metallic Silver in required colour with roller or brush. Ensure four to five hours for drying between each coat. Please refer to the product brochure or visit our website for the detail application procedure instructions or the demo video for the best results. It is advisable to carry out small scale trials before application over large surface area. Ensure a slight overlap of sections while working to avoid demarcations of the finish.
    Avoid windy conditions in the room. Room temperature should ideally be between 20°C to 35°C. Very hot and dry conditions are to be avoided. Use of any other paint apart from specially formulated Dulux Velvet Touch may deviate the desired finish and make it hard to recondition. Contains no added lead or mercury. STIR THOROUGHLY BEFORE USE.

    Health & Safety

    Keep out of the reach of children, away from food, drinks and animal feed. Avoid contact with skin or eyes. Wear eye/hand protection. Do not breathe vapor/spray. Use only in well-ventilated areas. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet [sanding]/[flatting] should be used wherever possible. If exposure cannot be avoided by provision through local exhaust ventilation, suitable respiratory protective equipment should be used. Remove as much paint as possible from brushes and rollers before cleaning. Do not use empty container for storing food. If swallowed seek medical advice immediately and show this container or label. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Avoid release to environment. Do not empty into drains or water course. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used.
    Download Adobe Reader

    Tips & Advice

    • 1. Preparing the Surfaces
      New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Treat any areas affected by mould, lichens, algae & moss with bleach. After priming new surfaces with Dulux Aqua Prime, fill the surface with Dulux Wall Putty. Apply primer on a wall putty before application of topcoat. Previously Painted Sound Surfaces: Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fibre brush and dust off. Spot prime and fill the surface as described above if required. Powdery, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prepare surface as described above.
    • 2. Cleaning
      Clean all equipment with clean water immediately after use
    • 3. Storing
      Store paint in dry conditions and protect from extreme temperatures. Container must be in a secure, upright position and be tightly closed.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    More than one wall to paint? Try our advanced paint calculator

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

    More than one wall to paint? Try our advanced paint calculator

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Edit a job

    Delete job

    Delete job

    Are you sure? All notes, photos and saved items will be deleted.

    Save colour

    10YR 67/111

    Save to My Workspace

    Save product

    Dulux Ambiance Velvet Touch Metallic Silver

    Save job

    Sorry, we couldn't find any results
    Fetching the data, please wait...