Dulux Ambiance Velvet Touch Linen

    Inspired by natural and rustic linen, let your walls stand out with a unique textured fabric effect
    30YY 81/123
    Change Colour
    Size
    Paint Calculator
    This product is not for online sale and can only be purchased from selected stores.
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Featured Finishes
    • Coverage 6-7 m2 per liter per coat
    • Drying Time 4-5 Hours
    • Coats 1
    Product Features
    • Delivers a Weave of Textured Fabrics

    Product Description

    Dulux Velvet Touch Linen is a premium special effects paint designed to deliver a wide variety of wall patterns with unique textured fabric effects on your walls. Velvet Touch Linen can be tinted in selected
    Dulux colours.
    Recommended for interior use only.

    Application Description

    After surface preparation apply 2-3 coats of Dulux Velvet Touch base coat in the recommended colour. Ensure 3-4 hours for drying between successive coats. Then apply one coat of Velvet Touch Linen in the required colour by roller. Finally, use the Dulux Velvet Touch Texture Brush in horizontal and/or vertical direction to create the desired Linen effect when the paint film is still wet. Please refer to the product brochure or visit our website for the detail application procedure instructions or the demo video for the best results. It is advisable to carry out small scale trials before application over large surface area. Ensure a slight overlap of sections while working to avoid demarcations of the finish. Avoid windy conditions in the room. Room temperature should ideally be between 20°C to 35°C. Very hot, dry conditions are to be avoided. Use of any other paint apart from specially formulated Dulux Velvet Touch may deviate the desired finish and make it hard to recondition. Contains no added lead or mercury. STIR THOROUGHLY BEFORE USE

    Health & Safety

    IRRITANT. May cause sensitization by skin contact. Contains METHENAMINE 3-CHLOROALLYLOCHLORIDE. May produce an allergic reaction. Keep out of the reach of children. Avoid contact with skin or eyes. Wear suitable gloves. If swallowed seek medical advice immediately and show this container or label. Treatments such as sanding, burning off etc. of paint films may generate hazardous dust and/or fumes. Wet sanding/ flatting should be used wherever possible. Work in well ventilated areas. Use suitable personal protection equipment. Do not empty into drains. Do not use empty container for storing food. Remove as much paints as possible from brushes and rollers before cleaning. Keep away from food, drinks and animal feed. Store in a cool and shaded place. Container must be in a secure, upright position and be tightly closed. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin wash immediately with soap and water or a proprietary skin cleanser. Do not use solvents or thinners. Wear eye/hand protection. Avoid release to environment. Dispose of used container in compliance with local regulation. Safety data sheet available for professional user on request.
    Download Adobe Reader

    Tips & Advice

    • 1. Preparing the Surfaces
      New or bare surfaces must be clean, dry and free from efflorescent salts. Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Treat any areas affected by mould, lichens, algae & moss with bleach. After priming new surfaces with Dulux Aqua Prime, fill the surface with Dulux Wall Putty. Apply primer on a wall putty before application of topcoat. Previously Painted Sound Surfaces: Remove all loose, defective or poorly adhering material by rubbing down using a suitable abrasive paper or stiff fiber brush and dust off. Spot prime and fill the surface as described above if required.
      Powdery, Dusty and Cracked Surfaces: Make good minor defects. For larger holes and cracks, use sand and cement mixture. Allow the surface to dry. Prepare surface as described above.
    • 2. Cleaning
      Clean all equipment with clean water immediately after use
    • 3. Storing
      Store paint in dry conditions and protect from extreme temperatures. Container must be in a secure, upright position and be tightly closed.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    More than one wall to paint? Try our advanced paint calculator

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

    More than one wall to paint? Try our advanced paint calculator

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Edit a job

    Delete job

    Delete job

    Are you sure? All notes, photos and saved items will be deleted.

    Save colour

    30YY 81/123

    Save to My Workspace

    Save product

    Dulux Ambiance Velvet Touch Linen

    Save job

    Sorry, we couldn't find any results
    Fetching the data, please wait...